14m Heat Cord (15.5m overall length) 


- Ideal for racking systems
- Flexible & Durable
- Get the heat right where you need it

Specially designed for reptiles, amphibians and many other small animals.

RoHS & CE approved

Please note - heat cords are best used in conjunction with a good thermostat to ensure that they do not under nor overheat an enclosure. 

Heat cords are one of the easiest and most convenient ways to provide required heat to your reptile and amphibian pets. Simply place the heat cord under the enclosure in the desired location and then switch it on. Heat cords give off continuous heat.

The temperatures generated by this heat chord will vary according to usage, enclosure type, size, and application. As a general rule a heat cord that covers around a third of the floor size of 
your enclosure is the correct size for your enclosure. 

Heat cords can be placed either inside or under your pets enclosure.

If using under your enclosure place a heat resistant barrier such as glass or similar between the heat cord and your furniture to ensure that the heat does not mark your furniture.

Set your enclosure up completely BEFORE you put any animals into it and ensure that the heat inside the enclosure is correct BEFORE putting your animals in. You will need a good thermometer.

Put the heat cord toward one end of the enclosure as you should have a heat gradient which results in a warmer end of the enclosure and a cooler end of the enclosure.

Available in :
1m - 15w Heat Cord (2.5m overall length)
3m - 30w Heat Cord (4.5m overall length)
6m - 60w Heat Cord (7.5m overall length)
8m - 75w Heat Cord (9.5m overall length)
10m - 100w Heat Cord (12m overall length)
12m - 100w Heat Cord (14.5m overall length)
* 14m - 140w Heat Cord (15.5m overall length)
18m - 180w Heat Cord (19.5m overall length)

Write a review